Kits and Accessories
|
5. Door Frame Marking Kits - UL 1994 Listed 6. Fire Extinguisher Marking Kits - UL 1994 Listed 7. Everlux Magnetic Signs 9. Type 3 Signs Fixing System - Suspended from Ceiling #1. Everlux Aluminium Frame  Everlux Anodized Aluminium Frame. The Everlux Aluminium Frame was developed to support the Everlux safety signs and it is supplied with all the accessories required for its installation.  The Everlux Aluminium Frame is composed by the following components:
Installation 1 – Insert the sign in the frame The frame contains an opening at the top, which allows the sign to be inserted.  2 - Fixing to the ceiling or to the wall throught the bracket The bracket is supplied with 4 holes to allow for a quick ceiling or wall installation.  3 – Frame adjustment to bracket The frame can be easily adjusted to the bracket by tightening the set screws with the L-wrench.  Note: Additional information is available in the complementary document "Instructions for installation”. To access the complete technical sheet, please go page Technical Datasheets or Downloads Everlux Self-assembly aluminum frames can be fixed to the wall using the self-adhesive pads wich are supplied with the frame kit or by using adhesive which is supplied seperately. Material: Extruded aluminium profile The frame kit is comprised of the following:
To access the complete technical sheet, please go page Technical Datasheets or Downloads Everlux Slim-line aluminium frames are supplied pre-fitted to the sign and area ready to install. Everlux Slim-line aliminum frame can be fixed to the wall using self-adhesive pads or tape, Adhesive or other proven methods. It is advised that the receiving surface is clean, dust and grease free. To access the complete technical sheet, please go page Technical Datasheets or Downloads The rail is screwed to the wall at multiple points along its length. Each rail is supplied with 1 end-cap  Everlux Door frame kit - single door - C 90 11 Each kit contains 5 Everlux ULC Listed strips (471/4 x 11/32 in) Everlux Door frame kit - double door - C 90 12 Each kit contains 6 Everlux ULC Listed strips (471/4 x 11/32 in) Note: The strips may require to be cutted in order to be adjusted to the size of each specific door frame. « return 6. Fire Extinguisher Marking Kits - ULC Listed  The use of photoluminescent strips to indicate the whole body of an extinguisher allows for the quick and easy identification of the exact location of the equipment, especially in the case of a power cut or power failure. Everlux Fire extinguisher frame kit (suitable for 5kg CO2) - C 90 01 Each kit contains enough strips to identify 5 fire extinguishers Everlux Fire extinguisher frame kit (not including 5kg CO2) - C 90 02 Each kit contains enough strips to identify 5 fire extinguishers 7. Everlux Magnetic Signs   Everlux can supply all type 1 signs with a magnetic finish that will allow a firm adhesion to all suitable metallic surfaces. These signs will offer an alternative solution when installing in a variety of applications such as storage and industrial areas, temporary signage and to a range of metallic surfaces such as doors and fire equipment and are also suitable to be installed indoors or outdoors.   In almost all premises there are obstacles that can be hazardous to occupants, particularly in an emergency evacuation. These hazards can include pillars, pipework, machinery and other objects which can protrude from walls, ceilings and walkways. Safety bumpers minimise the potential for injury if a collision occurs. The photoluminescent (phosphorescent) element of the bumper strips ensures that any potential hazards are clearly visible, particularly in the event of an emergency and/or loss of electrical power. There are two (2) types of safety bumpers: one suitable for edges (angle 90o) and another suitable for flate sufaces (for angles other than 90o)  Alternative solutions for fixing Type 3 suspended signs to accommodate differing ceiling types:
|
